8
1. Configuring the Network Interface
Informer15 Speaker (Models I-IP15 and I-IP15X) Modbus Enabled
Federal Signal www.fedsig.com
The Home page appears.
The Home page displays a summary of the current configuration settings for the
RTU. The Navigation Menu (blue hyperlinks on left) is used to access other System
Management web pages. Use the Help hyperlink to access the user manual from any
web page.
Fields
Description
Model
The RTU model of the device. This field will be blank for a few
minutes following power up or master reset.
RTU Number
The RTU’s assigned identity. (Commander only)
Description
The RTU’s description. (Commander only)
SmartMsg
Server
The RTU’s assigned default SmartMsg server. (Commander only)
SmartMsg
Failover List
The RTU’s SmartMsg Failover List. This field is blank until the
unit successfully connects to the server and retrieves failover list.
(Commander only)
MAC Address The MAC Address of the device.
IPv4
Addresses
The RTU’s assigned IPV4 address or its domain name.
DIGI Firmware
Version
The firmware version of the DIGI Connect ME 9210 module.
RTU Firmware
Version
The firmware version of the RTU.
Up Time
The elapsed time since power up or reboot.
7.
Record the MAC and IP address to ensure the device can be managed in the future.
