11
Installation
Description, Specifications, Installation, Operation, and Service Manual
Table 4 Physical
Dimensions
(H x W x D)
13.9 inches x 10.2 inches x 10.0 inches
35.3 cm x 25.9 cm x 25.4 cm
Weight
6.19 lb/ 2.81 kg
Amplifier Housing
Die-cast aluminum alloy with powder coated finish.
Housing sealed with a neoprene rubber gasket.
External mounting bracket included.
Speaker Cone Tip and Projector Spun aluminum alloy with powder coated finish.
Installation
Read and adhere to all safety warnings in this manual before installing the
Informer15 Speaker.
Electrocution or severe personal injury can occur when making electrical
connections, drilling holes, or lifting equipment. Therefore, experienced
electricians in accordance with national and local electrical codes, acting
under the direction of the installation crew safety foreman, should perform
installation.
Property damage, serious injury, or death could occur if an accumulation of
water, snow, dust, etc. resides in the speaker projector, severely reducing or
preventing operation of this device. Mount the unit so speaker projector is
pointed horizontally or slightly downward.
Property damage, serious injury, or death could occur if the projector is
mishandled during installation or over time. DO NOT rotate the projector more
than 180 degrees or internal speaker wiring may be damaged.
Property damage, serious injury, or death could occur if any objects are
in front of the speaker, severely reducing optimum sound distribution. For
maximum effectiveness, ensure that the front of the speaker is clear of
obstructions.
