2
Federal Signal
signaling.fedsig.com
2.
The equipment has an optional metallic break glass hammer mounted to the enclosure, which can store electrical
charge and therefore may provide a potential electrostatic charging hazard. The metallic break glass hammer has
a capacitance of 94pF.
3.
These devices reach a temperature of 85°C at the entry point.
Construction Products Regulation (CPR) Certification Information
2821
1.
Model Designation: CP-BG-x-x-x-xxx-xx-x
2.
Description: Manual call point for fire detection and fire alarm systems for buildings.
3.
Declaration of Performance No.: 0843-CPR-1073, 2821-CPR-0207. (To access it: Go to www.fedsig.com, search
model “CP-BG” to access product webpage, click “Resources” tab. The document is located under “Agency
Certificates” section)
4.
Standard Applied: EN54-11:2001/A1:2005.
5.
Identification Number of Notified Product Certification Body: 2821 (CE), 0843 (UKCA).
6.
Manufacturer: Federal Signal, 2645 Federal Signal Drive, University Park, IL 60484
7.
EU Auth. Rep: FS VAMA, Doctor Ferran 7, 08339 Vilassar de Dalt, Spain. UK Auth. Rep: Victor Products, Unit 3A,
Tyne Dock East Side, Port of Tyne, South Shields, NE33 55Q, ENGLAND.
8.
Marking Year for CE and UKCA: 2022
Conditions for Safe Use
1.
This device has been tested for a voltage range of ± 10%.
2.
Do not install Test Reset Key. Key may only be installed for applications not requiring EN54-11 certification.
3.
To enable correct installation and operation, review all sections in this manual #25500424A for all technical,
installation, and maintenance data.
UL-C-UL Signaling Certification Information (Model CP-PB Series)
1.
UL Certification applies to push button models series CP-PB Series only. CP-BG models are not UL/C-UL Listed.
2.
For use in Non Monitoring (NM) and Self Monitoring (SM) Emergency Signaling Applications.
3.
Not for use with Fire Alarm or Fire EVAC Applications. Product can not be marked “FIRE” or “EVAC.”
4.
Ambient temperature rating: -40°C to +60°C.
5.
Input Ratings: 48 Vdc, 3 A (max).
6.
This product is not provided with a preassembled conduit hub. A Listed hub shall be used and shall be connected
to the conduit before the hub is connected to the enclosure.
7.
Only the models with suffix “5” (No Red color and with tactile marking - see nomenclature below) can be used in
public emergency alarm reporting systems and emergency communications systems (ECS) in accordance with
NFPA 72.
Table 1 Callpoints Model Designation
Prod
Family
Activation Entries Color
Switch/Witing Term
Left Flap/Hammer
Indicator LED
Certification
CP
-
PB:
Push
Button
M: Metric
N: NPT
Y: Yellow
K: Black
G: Green
B: Blue
R: Red
S: Single, Clamp term
D: Dual, Clamp term
L: LED Dual, Clamp term
1: SIngle, Screw term
2: Dual, Screw term
3: LED Dual - Screw term
NNN: None
FNN: +Flap, No label
no hammer
FAN: +Flap, + Activate
label, No hammer
00: None
06: Indicator LED, 6 V
12: Indicator LED, 12 V
24: Indicator LED, 24 V
48: Indicator LED, 24 V
4: UL
5: UL w/NFPA72
tactile markings
(NO RED COLOR
OPTION ALLOWED)
