![background image](http://html1.mh-extra.com/html/federal-signal-corporation/commander-371st-250/commander-371st-250_installation-and-maintenance-manual_3854965013.webp)
13
Installation and Maintenance Instructions
Model 371ST-250 Strobe Light
HANDLE STROBE AND HALOGEN LAMPS CAREFULLY
Strobe and halogen lamps get hot enough to burn you. Always
allow these devices to cool before handling them. Halogen
and strobe lamps are also pressurized and if broken can result
in flying glass. Always wear gloves and eye protection when
handling these devices. Failure to follow this caution may result
in personal injury.
Figure 3
Flash tube replacement
DOME ASSEMBLY
DIE CAST RING
FRESNEL LENS
#8 SCREWS (2)
STROBE SPINNING
ASSEMBLY
FLASH TUBE
BASE
TURN DIE CAST RING
COUNTER-CLOCKWISE
TO REMOVE
290A3950B