Federal Signal Corporation Commander 371-120, Руководство по установке и обслуживанию

Страница: 8 / 60

8
Installation and Maintenance Instructions
Models 371-120 and 371L-120
Mounting the Light
The Model 371/371L light is designed for mounting on a flat
horizontal surface or on a 1" NPT pipe. For surface mounting
on solid substrates, the separately purchased Model 371BRCKT
surface mounting bracket can be used. If conduit side-entries are to
be used, disassemble the light as described in “Wiring the Light”
on page 10 and remove one or more knockouts with a blunt tool
before mounting the light. Use a file to remove excess flash around
the knockout.
Figure 1 Mounting options
371 LIGHT
ASSEMBLY
PIPE MOUNT SURFACE MOUNT
GASKET
MOUNTING
SURFACE
1/4" FLATWASHERS
DRILL THREE 9/32"
(7.143 mm) HOLES
1/4" SCREWS
1" NPT
PIPE
290A7364
Pipe Mounting the Light
Attach the light to the 1-inch NPT pipe by threading the light
clockwise on the pipe (Figure 1). For information on making
the electrical connections, see “Wiring the Light” on page 10.