27
Connecting the Mobile Camera System
Installation and Operation Manual
Federal Signal
www.fedsig.com
• White (White/CAM2): Connect a 12-24 V signal to
this wire to trigger when the monitor should display
CAM2. The green (CAM1) wire trigger will override a
trigger from this wire.
• CAM1 and CAM2: Connect cameras to these inputs.
A CAMCABLE-SHORT/-5/-10/-15/-20/-40 connected
to one of these inputs can provide camera cable
extension up to 131 ft (40 m). With the CAMADP-EXT,
two CAMCABLE-SHORT/-5/-10/-15/-20 cables can
also be connected in series to achieve lengths up to
131 feet (40 m).
• Monitor: Connect this 13-pin connector to the monitor.
2.
Any connections made outside the vehicle interior
(camera cable extensions, for example) should be
wrapped in the waterproofing tape.