13
Installation, Maintenance, and Service Manual
Federal Signal
www.fedsig.com
Setting the Light Bar Flash Pattern
4.
Tap the Brown/White wire once to change to the next pattern. The pattern dims as
the Brown/White wire is held to +BAT.
5.
Repeat step 4 until the desired pattern is selected.
6.
Turn the light bar off. Wait at least 5 seconds and turn the light bar on. Verify that
the pattern has been saved.
Mode 1 flash patterns are listed in Table 4.
Mode 2 enables flashing white to the front by default. It can be reprogrammed to a
different flash pattern with OR without flashing white. See Table 5 for the pattern list
for Mode 2.
Table 4 Allegiant
®
Flash Patterns
#
Description #
Description #
Description
1
Pattern 1*
11
Pattern 11
21
Pattern 21
2
Pattern 2*
12
Pattern 12
22
Pattern 22
3
Pattern 3*
13
Pattern 13
23
Pattern 23
4
Pattern 4*
14
Pattern 14
24
Pattern 24
5
Pattern 5*
15
Pattern 15
25
Pattern 25*
6
Pattern 6*
16
Pattern 16
26
Pattern 26
7
Pattern 7
17
Pattern 17
27
Pattern 27
8
Pattern 8*
18
Pattern 18
28
Steady On
9
Pattern 9
19
Pattern 19
10 Pattern 10
20
Pattern 20
*Conforms to California Title 13.
