Fedders Trion PORT-A-CART, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 12

4
3. POSITIONING THE UNIT
Roll the unit to a level floor space in the area in
which it is to be used. When the unit has been
properly positioned, lock the two swivel casters to
prevent movement during operation.
WARNING !
Combustible Materials Hazard
Can Cause Personal Injury, Death or
Equipment Damage
1. Due to potential fire hazards, do not mix
combustible materials with those that
would be a potential source of ignition.
Examples of combustible materials in-
clude but are not limited to: wood dust,
paper dust, lint from fabrics or buffing
wheels, grinding dust from painted sur-
faces and aluminum or magnesium
dusts. Examples of potential ignition
sources include but are not limited to:
grinding dust from ferrous metals or
sparks from any source.
2. This equipment should not be used for
the collection of any materials where
there is a risk of explosion. Pressure
relief or explosion vents should not be
applied to the equipment or any adjoin-
ing system.
3. Equipment location, installation and op-
eration should comply with all national
and local fire codes. When in doubt,
consult the proper authorities.
4. Workers and machine operators should
be instructed to keep any burning ob-
jects, such as cigarettes, safely away
from air inlets leading to the equipment.
5. All those involved with the use of this
equipment should comply with the
statements pertaining to worker safety
as noted in this manual.
WARNING !
Electric Shock Hazard
Can Cause Electrical or Equipment
Damage
Do not connect power before the installa-
tion is complete.
ELECTRICAL POWER REQUIREMENTS
The blower motor is 1 1/2 HP requiring a 120
volt, 60 Hz, 1 ph (17 amp) source of power.
The unit is supplied with a 10’ (4.7 m) power
cord.
OPERATION
Plug the power cord into a 120 volt, 60 hertz
outlet. Turn the power switch on.