Room Air Conditioner
2
Tools Needed
Screwdrivers
Tape
Measure
Carpenter’s Level
5/8” wood screws..............9
Brackets ............................2
A
B
A
B
Installation Parts Kit
Window Requirements
Air conditioner is factory prepared for installation in
standard double hung windows (air conditioner cannot be
installed in other types of windows). The air conditioner
can be installed in windows 23” to 34” wide when filler
panels are used. In windows 19” to 22” wide the air
conditioner can be installed without the filler panels. All
windows must open at least 12 3/4” vertically.
Install the air conditioner in a window where there will be
enough clearance around the cabinet to allow ample
circulation of air through unit. All supporting parts should
be secured to firm wood, masonry, or metal.
Installation in window 23” to 34” wide
1. Open and mark center line of window. Measure and mark
6” to the right of the center line and 6” to the left of the
center line (Fig. 2).
2. Place bracket so that the inside edge rests on the
appropriate 6” mark. Secure brackets with two (2) 1” long
wood screws (Fig. 2).
Filler Panel Installation
1. Place tabbed side of curtain in track on side of air
conditioner cabinet, and slide down the track until the
curtain is even top and bottom (Fig.1).
2. Slide the filler panel frame onto the air conditioner
cabinet using the tracks on the top and bottom of the
unit. Slide the frame as close to the air conditioner as
possible so that the curtain locks into place. Gently pull
the frame out until it is the correct length for your
application.
1
Tabbed side
of curtain
Curtain
track
Filler panel frame
Curtain
Filler panel
frame track (top bar)
Filler panel
frame track
(bottom bar)
6"
6"
Center
of
window
opening
5/8” Screws
Bracket
Bracket
Window Sill
5/8” Screws
2
Additional Safety Precautions
•
Do not
cut, alter or remove any of the expanded
polystyrene (styrofoam) inside this air conditioner.
•
Do not
store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
The fumes can create a fire hazard or explosion.
•
Do not
introduce objects in the air discharge area. This
could cause permanent damage.
•
Do not
pour liquids on the air conditioner as this could
cause a malfunction. With the unit unplugged, use a
damp cloth for cleaning the unit.
•
Do not
use strong solvents to clean the air conditioner.
•
Clean the air conditioner filter every two weeks to avoid
overheating caused by air obstruction. Do not operate
without filter.
•
Do not
obstruct the air intake area of your air
conditioner, as this could cause overheating, thus
activating the unit’s security switch and shutting off the
unit.
•
Do not
block air circulation to outside louvers of cabinet.
•
Do not
block air flow inside with blinds, curtains, or
furniture, or outside with shrubs, enclosures, or other
buildings.
•
Do not
run the air conditioner with an outside
protective cover in place. This could result in fire or
mechanical damage within the air conditioner.
