17
/
23
1. Install the brackets to the base of the battery rack using 2 pcs M4*10 socket head cap screws with locking
torque of 2.5N•m.
Figure 5-3
2. Install the brackets to the HV Box of the battery rack using 2 pcs M4*10 socket head cap screws with
locking torque of 2.5N•m.
Figure 5-4
3. Place the base against the wall and mark the position of mounting holes on the wall. Remove the base and
drill holes using an electric drill. The electric drill must with a dust cover to prevent dust from falling off.
Figure 5-5
