14 ATTACH SEAT SLING.
•
The seat sling is made of black packcloth. The upper part
has two looped sides. The stitching at the front of the seat
sling is wider than at the back.
•
Slide the Gunwale extension bars (red and green) through
the looped sides, ensuring the two stripes of tape are at
the stern.
•
Attach the Gunwale bars as you attached and installed the
keel and chine bars. Use the lever bars again to extend the
gunwale extension bars. Extend till the spring button pops
up in the first hole.
•
Extend Keel and Chine bars to second hole. Depress spring
button, lever tubes until spring button appears in second
hole. Extend gunwales to second hole.
•
The bottom side sections of the seat sling are a
Velcro-Sandwich. Slide and secure bottom section around
chine bars.
Feathercraft
K1 Expedition
16
Gunwale Bar
Chine Bar
(Seat sling installation shown without skin for illustration purposes.)
