Document Number:
MAN
– FD70CMT-M
Rev:
E
Revision Date:
05/15/2017
Page 4 of 12
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Specifications
Display Type
7” TFT Color LCD
Supported Resolutions
640x480 ~ 1600x1200
Display Brightness
400 cd/m
2
Contrast Ratio
400:1
Display Dimension
6.80”(W) x 4.75”(H) x 1.20”(
D)
Mount Dimension Stowed
7.0”(W) x 8.75”(H) x 1.35”(D)
Mount Type
Articulating Arm
LCD Dimension
5.89”(W) x 3.5”(H)
Weight
2 lbs 1.5 oz.
Viewing Angle
140°/100° (H/V)
Power
12VDC @ 1.0 Amps
28VDC @ .4 Amps
PC Video Input
VGA (Analog RGB 15 pin D-sub)
Standard Video Input
2 Composite Video
Video Type Supported
NTSC, PAL
Screen Control
On-Screen Display Menu
Remote Control
IR, included
Materials
Aluminum
DO-160 Testing
Section 21, Category B
Installation Instructions
All cabin entertainment equipment, such as the FD70CMT-M, should be installed on a
non-essential bus and have a dedicated circuit breaker. It is a requirement that a switch
be installed in the cockpit so that the pilot can de-energize the entertainment system
should it become necessary.
The order in which you proceed is up to the installation centre. We suggest that you first
look at the mounting plate prior to installing the LCD to make sure you have the proper
room and conditions in the aircraft to mount the display to the ceiling. Most aircraft have a
significant curvature in the headliner and it will probably be necessary to modify the
headliner to mount to a structure that will hold this mount.
Once it has been determined that you have sufficient room and mounting locations for the
FD70CMT-M, then it would be appropriate to start mounting the base to the frame. The
FD70CMT-M is attached to the aircraft with four #8 socket head cap screws. There are
four attach points on the ceiling mounting plate.
There
is one DB15 connector on a 16” cable coming from the LCD, used for power, VGA
and two composite inputs.
