Document Number:
MAN – FD320CV-X
Rev:
A
Revision Date:
09/23/2019
Page 4 of 20
©
2019 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
General Information
The FD320CV series are 32” High-Definition Widescreen LCD which have features that
allow installation in the smallest of mounting areas with minimum interface equipment. Built
with retrofit aircraft integration in mind, these displays can switch between video input
sources using an infrared remote.
Additional Information
The FD320CV series utilizes a state of the art digital video decoding chipset for the analog
video input.
The FD320CV series can also be connected to existing video switchers and use only a
single video input from a selector interface box. In this case, the IR remote will only be used
to set up the screen after installation e.g. adjust brightness, contrast, etc.
The LCD is protected with a .125” polycarbonate lens. The purpose of this lens is to
prevent scratching of the LCD and reduce glare. The enclosure for the FD320CV series is
aluminum. DO-160 testing has been completed and the report is available upon request.
Installation Instructions
All cabin entertainment equipment should be installed on a non-essential bus and have a
dedicated circuit breaker. It is a requirement that a switch be installed in the cockpit so that
the pilot can de-energize the entertainment system should it become necessary.
Refer to ICD-212, in this manual, for mounting provisions.
It is recommended that you leave at least ½ inch of space around the rear, top and bottom
of the display for the exhaust fan to have circulating air.
