Document Number:
MAN – FD320CV-X
Rev:
A
Revision Date:
09/23/2019
Page 13 of 20
©
2019 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Operation Instructions
The unit will turn on automatically upon power application and if using an external video
source selection box the IR is not needed. If you are using the IR to change the video
source selection, then you need to have the IR Detector visible to the cabin. The FD320CV
series are continuously powered on but can be de-energized by removing power from the
entertainment system. No pilot or aircrew action is necessary during flight or ground
operation.
The passengers will be able to change the video input/source of the unit using the video
source button on the display, or remotely with the included IR remote. Point the IR remote
at the top of the LCD to make changes.
When applying 28VDC power, the display will turn on and look for a valid input on the last
known source. If no input is found, the display will go to standby mode. Pressing the Select
button will select new video input.
