and turn the channel switch to select "OFF/ON", select "ON" it means beep function is on, "OFF" me
ans the function is off. Press mto Confirm after selection and press alto exit.
KEYPAD LOCK SETTING
Under frequency/channel mode, press [FUN]+
flD
key to enter the menu mode, turn the channel swit
ch to select "MAN UAL" "AUTO". After selection press
m
Key to confirm and press
m
to exit.
SCAN MODE
Under frequency/channel mode, press FUN+
flD
key to enter the menu mode, turn the channel switch
until the screen shows "SCAN?" press Bo confirm, you can select the three types: TO,CO,SE.
• Time Operation mode(TO)
When the radio detects a signal, it will pause scanning and remain the current status for 5 seconds,
and it will go on with the scanning even if the signal still exists.
• Carrier frequency mode(CO)
When the radio detects a signal, it will stop scanning and stay on the same frequency till such signal
disappears. There is 2 seconds latency between the disappearance of signal and continuing to scan.
• Search scan mode(SE)
When the radio detects a signal, it will stay on the frequency or channel of such signal and exit scan
ning.
VOICE GUIDE FUNCTION
Under frequency/channel mode, press [FUN]+
flD
key to enter the menu mode, turn the channel swit
ch until the screen shows "VOICE?", Press &key and turn the channel
switch to select "OFF/ENG", if you select "OFF", it means turn off the VOICE GUIDE function.
After selection press &key to confirm and pressalto exit.