FM RADIO function
This radio has a FM radio function.
1) Press [FUN] key the display will show "F" icon, press the side key 3 (predefined as FM radio) again
to enable and disable the FM radio.
Under FM radio mode ,you can use the keypad to input the frequency of the station you need. Turn the
channel switch clockwise, the frequency or channel will rise; turn the channel switch counterclockwise,
the frequency or channel will fall, the step is 50K/100K.
2) FM radio mode switch:
Pressm
key then press the keypad to enter the FM radio station you stored.
3) FM radio scan: Press SIDE KEY 3 the FM radio frequency will rise, press SIDE KEY 4 the FM radio
frequency will fall. It will stop scan and show the current frequency you scan when the radio receive a
signal.
Group Alert Alarm
The Group Alert Alarm, which is sometimes called and used as a 'man down alarm' can be transmit
activated on a channel by pressing the orange button on the top of radio.
This alarm will only sound for less than 3 seconds in any 60 second period, regardless of how many
times the button is pushed in that minute. This is to comply with the 'tone timing' restrictions imposed
by the CBRS operational requirements. If the radio has been programmed with PTT ID on this channel,
when the Alarm is activated, it will also transmit it's caller ID with the alarm.
Note: Tone Timing Restrictions
The CBRS (Citizen Band Radio Service) has timing restrictions on tones as part of its operational
requirements, primarily to reduce 'nuisance' behaviour These tones include Alert Alarms, Caller ID
Tones, and Roger Beeps. As part of Standards, the manufacturer is required to minimise the length
of this tones, however the onus is placed on the operator to not use tones excessively, or they could
be in breach of these restrictions. This does not apply to LMRS.
Function key [FUN]
The Function Key can be found above the PTI switch.
The Function Key allows you to access the transceiver's adjustable function settings, either quickly by
using the radios keypad (hot-keys), or through a menu (menu can be accessed by 9SET key), or
radio's side keys.
When the Function Key is pressed, a "F" icon will appear in the LCD Screen. This will only remain