uEZ GUI Start Here Guide
UEZGUI-1788-56VI
Rev. 1.11 Aug 31, 2016
Page 3
1.
Hardware Verification
The µEZ GUI kit comes with a pre-installed 4GB or larger SD card that contains files
required for the demo application and slideshow to run. It also contains user manuals,
schematics, and documentation for the product including this guide. FDI recommends
that you visit the documentation tab of the product page of your µEZ GUI to get the
latest documentation.
Power is supplied via the USB power adapter and cable provided in the kit.
1.
Connect the USB cable to the mini USB Type B connector (P2) on the µEZ GUI.
2.
Connect the other end of the USB cable to the provided universal AC power
supply’s 5V USB power output.
NOTE: The µEZ GUI must be powered with the included universal AC to 5V USB plug
power supply or through the alternate power and com port on the side. Do not try to
power the µEZ GUI from a computer’s USB port. The standard PC USB port does not
provide the necessary current to power the µEZ GUI. The JTAG port and J-Link probe do
not power the µEZ GUI.
The following screen will appear once power has been connected to the device:
You can now explore the out-of-box demos. Test the GUI by selecting “Draw” and
drawing lines on the screen with your finger.
Figure 1:
UEZGUI-
1788-56VI
Figure 2:
Out-of-Box
(OOB)
Demo