FDI uEZ GUI, Руководство для начинающих

Страница: 5 / 28

uEZ GUI Start Here Guide UEZGUI-1788-43WQR
Rev. 1.11 Aug 31, 2016 Page 5
3. Connecting the J-Link Debugger to the µEZ GUI for programming
1. Connect the J-Link probe to a PC with an included USB cable.
2. Connect the J-Link probe to the FDI mini-10 pin JTAG connector (J5) on the bottom
side of the µEZ GUI. The J-Link ribbon cable and FDI adapter for the µEZ GUI are
supplied in the kit. The 10-pin connector can only be connected one way.
3. If not already done, connect the µEZ GUI to the power supply with the second
included USB cable.
4. Developing a Simple GUI Application with emWin
A. emWin Introduction
emWin ( segger.com/emwin.html ) is a software library from SEGGER which provides an
efficient GUI library that is processor and LCD controller independent. emWin enables
you to easily add graphics to an application and is included with µEZ. Some of the
features of emWin include:

Basic drawing functions such as drawing lines, squares, circles and polygons.
Figure 3:
J-Link
Hardware
Figure 4:
J-Link
Connected
to µEZ GUI