ST100 Series Configuration Software
Fluid Components International LLC
15
Factory Tab Screens
The
Factory
branch on the menu tree provides factory-only setup items. Only the factory or its respresentatives can change data in this group.
Table 5 – Factory Tabs
Tab Name
Tab Description
Password Level
Factory Parameters
Factory use only. (Calibrated Min/Max data.)
Factory
Identification
Factory use only. (Instrument ID data and unit MAC address.)
Factory
4-20mA Factory
Factory use only. (4-20 mA output DAC count scaling and manual output con-
trol, plus 4-20 mA input raw A/D counts and gain & offset adjustment.)
Factory
Options
Factory use only. (Option inventory: HMI display, FEs [2 max. for ST100]), and
pressure sensor type.
Factory
HART
Factory use only. (HART ID info: electronics revision, HART ID, int. HART rev.)
Factory
Memory
Factory use only. (Erase various memory spaces.)
Factory
Reset idRs
Factory use only. (Run idR check for selected FE, and then set
Measured Ohms
val-
ues as new baseline for
Expected Ohms
values [click
Reset Expected idR Values
]).
Factory
Figure 27 – Example Factory Parameters Tab (Factory)
Figure 28 – Example Identification Tab (Factory)
