FCI ASD-0002, Руководство по установке

Страница: 6 / 16

P a g e | 6
Construction /
Installation Diagram
Box Assembly
i.
Using a flat head screw drvier open
the front box cover
ii.
Use the mounting grey plastic
bracket as a guide, mark where
holes need to be drilled. Important:
Make sure bracket and case unit is
mounted level.
iii.
When installing onto a concrete
wall, drill holes 30 mm deep using a
6 mm masonry drill bit. Insert wall
anchors into the holes and mount
the dispenser using screws.
iv.
Remove the grey rubber battery
cover and install 3 AA size
batteries. Assemble back the
rubber cover and tighten the cover
using the four supplied Philips
screws. Guide the male battery box
cable through the bottom opening
and place the case.