FCC BBQ PERFORMANCE II 4.1s, Руководство пользователя, Страница: 21 / 32

A S S E M B L Y
NB!
ASSEMBLY IS NOW COMPLETE. ALL JOINTS AND CONNECTIONS MUST NOW BE LEAK
TESTED BEFORE USING THE BBQ. LEAK TEST ANNUALLY, AND WHENEVER THE GAS BOTTLE
IS REMOVED OR REPLACED.
23
Hang the single loop end of matchstick holder (33) onto the screw on right firebox.
Connect the correct flexible hose to the gas inlet connection.
1) If the gas inlet is a nozzle, plug in the hose and fix it with a clamp firmly.
2) If the gas inlet is a thread type, connect the flexible hose with left thread connector.
Check up the gas tightness after connection.
The flexible tube should avoid coming in contract with hot surface or directly
placing below the side burner.
Fit the doors (28) in the cabinet by inserting the hole in the bottom of the door onto the pin (B).
Secure the top of the door by squeezing the spring-loaded tab at the top and slide the door in
so the pin hits the hole at the top of the door.
Regulator and hose are sold separately
and are not included with this grill.
Most dealers of gas-powered products
have regulators and gas hoses for sale.
NB! The gas hose used must not
exceed 120 cm.
24
Locate the ignitor button on the control panel of the grill.
•
Unscrew the ignitor button.
•
Place AA battery inside the ignitor negative end first.
Make sure the spring is located inside the rubber boot
of the ignitor button.
•
Screw ignitor button back into place (see illustration).
Caution: Do not overtighten the ignitor button. If the
plastic battery housing cracks. water can get in and
destroy the igniter
Note: AA battery is not provided by manufacturer.
21