Read before assenbly
A screwdriver (not provided)
is necessary when assembling the BBQ.
The BBQ should be assembled by two persons.
●
FOLLOW THE ORDER IN THIS MANUAL TO AVOID INCORRECT ASSEMBLY.
PARTS OF THE ASSEMBLY WILL REQUIRE HEAVY LIFTING WHICH
SHOULD BE PERFORMED BY TWO PEOPLE TOGETHER, TO AVOID
PERSONAL INJURY AND DAMAGE TO THE GRILL. SOME METAL PARTS
MAY BE SHARP, WEAR PROTECTIVE GLOVES.
●
POWER TOOLS SHOULD NOT BE USED TO ASSEMBLE THE GRILL.
TOOLS WITH TOO MUCH FORCE CAN DAMAGE THE SURFACE
TREATMENT ON SCREWS, DAMAGE ENAMELLED / LACQUERED PARTS
OF THE GRILL, AS WELL AS LOOSEN PRE-ASSEMBLED NUTS.
●
IF THE PRODUCT'S VARNISH OR ENAMEL IS DAMAGED DURING
ASSEMBLY, WE RECOMMEND THAT THE DAMAGE BE TREATED
IMMEDIATELY TO AVOID LATER RUST DAMAGE. SUITABLE HEAT-
RESISTANT VARNISH CAN BE ORDERED FROM [email protected].
!
Make sure that all parts and screws are included by comparing the
parts list with the contents of the box. Also check that everything is
undamaged before assembling the product.
If the grill is damaged during transport, do not assemble the grill
before contacting your dealer or [email protected].
Transport damage to parts, varnish or enamel must be reported
to the dealer or FCC BBQ before mounting and using the grill. If
damage is reported after, there is a possibility that damage may
have occurred during assembly. This will not be considered as
transport damage.
Please note that some parts may be located in the Styrofoam to
protect the part during transport. If parts are missing, first check
the packaging carefully.
Remove all remnants of packaging material and any plastic foil from
the grill before using the grill.
FOLLOW THESE INSTRUCTIONS CAREFULLY TO AVOID
SERIOUS PERSON INJURY OR DAMAGE TO YOUR BARBECUE.
5
fccbbq.com
