FCAR FD505 Wheel Alignment System User Manual
52
temperature;
b.
The main host and display should be placed on a flat workbench. Do not place the
device near a heat source or under the direct sunlight;
c.
Pay attention to heat dissipation during the use of your equipment, keep the
ventilation around the machine well; the working place of the aligner should be
protected from moisture and corrosion, and working in a humid environment will
cause adverse effects to the equipment;
d.
Some parts of the aligner, such as monitors are sensitive to magnets. Do not place
the device near the magnet.
Precautions for using reflector:
1)
The reflector should avoid glare or sunlight interference during use, otherwise it will
not work properly;
2)
It should be placed in a ventilated and dry place after use;
3)
The surface of the reflector should be regularly cleaned with a soft cloth;
4)
Do not vibrate, impact, or slip the reflector to avoid damage to the sensing element;
5)
Do not open and change the original structural parts.
Equipment maintenance
a.
The surface of the screen will absorb dust due to static electricity. It is recommended
to purchase a special wiper for LCD screen to clean the screen of the host.
b.
To avoid fingerprints, do not wipe the dust with your fingers. Do not use chemical
cleaner to wipe the screen.
c.
Do not use a dissolved chemical such as banana oil, engine cleaner, or gasoline to
wipe the host;
d.
When the equipment is dirty, please cut off the power first and use a non-woven
