Fbt 38591, Руководство по эксплуатации

Страница: 41 / 60

CONNECTORS
TO SPKR TO SPKR
POSITIVE OUT NEGATIVE OUT
NEGATIVE OUT
POSITIVE OUT
STEREO OUT CONNECTION BRIDGE OUT CONNECTION
male
female
diagram
stereo
mono
diagram
diagram
The 3-pole XLR connectors are almost always used for conducting mono-balanced signals; the 3-poles correspond respectively to ground
(1), the positive signal (2) and the negative signal (3).
SPEAKON is a connector which is specially adapted for connecting power terminals to loudspeakers; when inserted in a appropriate socket
it locks so as to prevent accidental disconnection; moreover, it is equipped with protection against electrical shocks and guarantees the
correct polarisation.
The
JACKS are typical connectors for the transporting of two separate signals through two channels, left and right, using a single connector
and therefore they can be either mono or stereo. Mono jacks (TS) also known as unbalanced jacks, are recognisable from stereo or
balanced jacks (TRS) by their composition. The point of the mono jacks is divided into two parts, tip and ground (Tip and Slave) to which the
two poles are connected; the stereo or balanced jacks are divided in three parts, as they have a central ring (Ring) which is connected to a
second wire, the third (negative) pole.
37