- 4 -
4XLFN5HIHUHQFH
The following table lists the “Quick Commands” available with this control.
Key
Description
Keypads
Comments
#
1
Quick Arm - If system is
ready
All keypads
Allows you to arm the system without requiring your user code.
User code is always needed to disarm the system, though.
#
2
Force Arm - bypasses faulted
zones
All keypads
Allows you to arm the system even if some zones are faulted.
These zones will be automatically bypassed and will be
unprotected.
Bypass
zone
Quick Bypass -
All keypads
If not enabled requires user code with authority 1,2 or 3
#
3
Set Time
All keypads
May require user code
#
4
Zone Dir
LCD only
Mode terminates after last enabled zone
#
50
Quick Help
LCD only
#
51
Show Time
LCD only
May also require code
#
52
Show Auto
LCD only
May also require code
#
53
User log view
LCD only
Also, needs user code with authority level 1 or 2
#
54
Set Auto Time of current
part.
All keypads
by partition, need user code
#
55
Display Firmware Version
LCD only
#
56
Display Key Fob Low
Batteries.
All keypads
#
57
Door Strike
All keypads
May require certain user code
#
58
Change/View Pager number
All keypads
For keypad partition, only LCD shows phone number
#
6
Display/Toggle Chime Mode
All keypads
LCD displays current state first, then offers to toggle. All
others just toggle the state.
#
7
Assign user to other
partitions
All keypads
Need user Auth. Of 1 or 2. Digit 4 (P) enables user to page.
Paging must be enabled and turned on.
#
8
User Page Toggle
All keypads
Toggles if users should send page for O/C by partition
#
9
User On-line
All keypads
Connects to downloader while on line, disconnects home phone.
#
0
Multi-Part
All keypads
LCD displays current enables, 1,2,3,P - P=
