- 11 -
User Codes
TO ADD OR CHANGE A USER CODE
Users can be added or changed directly at the keypad. Your system can have up
to 15 different user codes. Users #1 and #2 are the only users allowed to add or
delete other user codes.
To add or change a user code, press the Code button followed by user #1 or user
#2 of the 4-digit user code. Then enter the new user number and the new 4-digit
user code. The keypad will beep after each digit is pressed.
User #1 or #2 Code
User ID
New User Code
CODE
nn
Use the system reference sheet to record system users. On this sheet your
installer will indicate if you have chosen to dedicate a user code to send an
emergency Ambush or Duress signal. You may also have chosen to reserve one
user code that is only allowed to turn the system on. This code will not be able
to turn the system off.
TO DELETE A USER CODE
To delete a user, press the Code button followed by the 4-digit master user code.
Enter the the user number, then press [#] to delete. For example, to delete user
3, do the following:
Master User Code
User ID
# to delete
CODE
03
#
NOTE:
User #1, the master user, cannot be deleted but it can be changed using
the ADD OR CHANGE user procedure.
THE ARM-ONLY CODE (Maid Code)
If you choose to have a code that cannot turn the system off, but can turn the
system on, have your installer program this feature. If programmed, user code
5 will have System On capability only, and you can issue this code to a
temporary user so he can secure the premises when he leaves.