3
INSTALLATION & OPERATION ADDENDUM
77X SERIES–FC
SAFETY
Frozen Cocktail (FC) Alcohol Safety
In addition to all other safety requirements listed in Section 1 of the 77X Installation and Operation Manual, the following
section includes the safety requirements for FC units. This dispenser is designed to dispense premixed alcoholic beverages
with an alcohol by volume (ABV) of less than 14%.
WARNING: The use of a product that is 14% ABV or greater could potentially cause internal damage to seals, hoses,
and materials as well as create a potential flammability risk.
SPECIFICATIONS AND REQUIREMENTS
FC Electrical Requirements
§
INSTALLATION
Dispenser Mounting
The FC unit is not designed to be sealed to a countertop surface or floor; use the information in this section instead of
Section 4.2 in the Installation and Operation Manual. If this unit is to be placed on a countertop, it must be mounted
on support legs to allow a minimum countertop clearance of 4.0 inches. The legs install easily into the same four holes
used to bolt the frame to the shipping pallet. As an added benefit, this installation typically meets state and local health
department codes.
§ General requirements only. Always check dispenser nameplate label for specific rating information.
Requirement
Frequency
60 Hz
Operational Voltage
230 VAC ± 10%
Current
771
18.5 A
772
19.3 A
773
20.1 A
774
20.9 A
Minimum AMP Breaker
771/772/773/774
30 A