Fayat DYNAPAC DRP40DX Скачать руководство пользователя страница 62

Страница: 62 / 110

8.1 Preliminary remarks and safety notes

DANGER!
Danger to life caused by an operationally

unsafe machine!

–

The machine must only be serviced by quali-

fied and authorized personnel.

–

Follow the safety regulations for maintenance

work

Chapter 3.9 „Maintenance

work“ on page 33

WARNING!
Health hazard caused by fuels and lubricants!

–

Safety regulations and environmental protec-

tion regulations must be followed when han-

dling fuels and lubricants

Chapter 3.4 „Han-

dling fuels and lubricants“ on page 23

Wear your personal protective equipment.

Do not touch hot components.

Park the machine on horizontal, level, firm ground.

Perform maintenance work only with the engine shut down.

Make sure that the engine cannot be accidentally started during

maintenance work.

Thoroughly clean machine and engine before starting maintenance

work.

Do not leave any tools or other objects, that could cause damage,

in or on the machine.

After maintenance work has been completed, dispose of fuels and

lubricants, filters, sealing elements and cleaning cloths in an envi-

ronmentally friendly way.

After all maintenance work is completed reinstall all guards and

safety installations.

Maintenance – Preliminary remarks and safety notes

DRP40DX

Содержание DYNAPAC DRP40DX















































































































Результаты поиска

Содержание DYNAPAC DRP40DX

Отзывы:

Похожие инструкции для DYNAPAC DRP40DX

Бренды по названию

Популярные бренды

Fayat DYNAPAC DRP40DX, Руководство по эксплуатации

Результаты поиска

Содержание DYNAPAC DRP40DX

Отзывы:

Похожие инструкции для DYNAPAC DRP40DX

Бренды по названию

Популярные бренды