manualshive.com logo in svg

Fayat Dynapac DFP6, Руководство по эксплуатации

Поделиться
Скачать
Fayat Dynapac DFP6 Скачать руководство пользователя страница 63

6.3  Operation

Guide the machine only by the guide handle.

Guide the machine so that your hands do not hit against solid

objects.

Keep feet clear of the vibrating base plate.

CAUTION!
Danger of injury caused by uncontrolled

machine movement!

–

Always hold on to a running machine.

–

Always keep an eye on a running machine.

Components can be very hot during or immediately after operation.

WARNING!
Danger of burning on hot components!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

–

Avoid touching hot components.

WARNING!
Loss of hearing caused by too high noise bur-

dens!

–

Wear your personal protective equipment (ear

protection).

Protective equipment:

n

Hearing protection

n

Working clothes

n

Protective gloves

n

Safety shoes

1.

Make sure that no persons are in the danger zone.

2.

NOTICE!
The centrifugal clutch may be damaged!

–

Operate the machine only with the

throttle lever in “MAX” position.

Set the throttle lever to “MAX” position.

ð

Machine vibrates forward.

Fig.  43

Operation – Operation

 

DFP6

 

63

Содержание Dynapac DFP6





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды