Fayat Dynapac DFP6 Скачать руководство пользователя страница 20

Страница: 20 / 116

Safety goggles

To protect the eyes against airborne particles and

squirting fluids.

Face protection

To protect the face against airborne particles and

squirting fluids.

Hard hat

To protect the head against falling parts and to protect

against injuries.

Hearing protection

To protect hearing against excessive noise.

Respiratory protection

To protect respiratory tracts against substances or parti-

cles.

3.1.4 Intended use

This machine must only be used for:

Compaction of all types of soils

Repair work on all types of soil

Paving of walkways

Work in trenches

Underfilling and compaction of hard shoulders

Intended use also includes compliance with the specified oper-

ating, maintenance and repair measures.

3.1.5 Improper use

Dangers may arise from the machine when it is used for purposes

other than the one it is intended for.

Any danger caused by improper use is the sole responsibility of the

operating company or driver/operator, the manufacturer cannot be

made liable.

Concerning your safety – Basic prerequisites

DFP6

Содержание Dynapac DFP6





















































































































Результаты поиска

Содержание Dynapac DFP6

Отзывы:

Бренды по названию

Популярные бренды

Fayat Dynapac DFP6, Руководство по эксплуатации

Результаты поиска

Содержание Dynapac DFP6

Отзывы:

Бренды по названию

Популярные бренды