manualshive.com logo in svg

Fayat Dynapac DFP6, Инструкция по эксплуатации

Поделиться
Скачать
Fayat Dynapac DFP6 Скачать руководство пользователя страница 99

8.9.3  Cleaning the water spraying system

Protective equipment:

n

Working clothes

n

Safety shoes

n

Protective gloves

1.

Remove the cap (2).

2.

Open the rotary button (1) completely and let all water run

out.

Alternatively you may also remove the water

tank for cleaning.

3.

Flush the water tank with a strong water jet, until all dirt has

run out.

4.

Fill the water tank with clean water and close the cap.

8.9.4  Cleaning the compact water spraying system

Protective equipment:

n

Working clothes

n

Safety shoes

n

Protective gloves

1.

Remove the cap (1).

2.

Pull the hose (2) off the shut-off valve.

3.

Open the shut-off valve (1) completely and let all water run

out.

Alternatively you may also remove the water

tank for cleaning.

4.

Flush the water tank with a strong water jet, until all dirt has

run out.

5.

Connect the hose to the shut-off valve.

6.

Fill the water tank with clean water and close the cap.

1

2

B-230-0073

Fig.  95

1

Water

B-230-0117

Fig.  96

1

2

B-230-0063

Fig.  97

Maintenance – As required

 

DFP6

 

99

Содержание Dynapac DFP6





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды