Fayat CC424CHF, Инструкция по эксплуатации

Страница: 46 / 158

Machine description
4812159501_D.pdf 2018-04-12
No Designation Symbol Function No Designation Symbol Function
16 Manual sprinkler Continuous sprinkling on both drums. 16 Manual sprinkler Continuous sprinkling on both drums.
17 Increasing sprinkling (timer) Each push on the button gives higher sprinkling water volume
on drums. 17 Increasing sprinkling (timer) Each push on the button gives higher sprinkling water volume
on drums.
18 Automatic sprinkling By activating the sprinkling water will engage and disengage
automatically when the F/R lever is moved from neutral. 18 Automatic sprinkling By activating the sprinkling water will engage and disengage
automatically when the F/R lever is moved from neutral.
19 Decreasing sprinkling (timer) Each push on the button gives lower sprinkling water volume
on drums. 19 Decreasing sprinkling (timer) Each push on the button gives lower sprinkling water volume
on drums.
20 Working lights By activating the working lights will turn ON. 20 Working lights By activating the working lights will turn ON.
21 Horn Press to sound the horn. 21 Horn Press to sound the horn.
22 Emergency stop Brakes the roller and switches off the engine. The power
supply goes off.
NOTE: The emergency stop must be deactivated when
starting the machine.
22 Emergency stop Brakes the roller and switches off the engine. The power
supply goes off.
NOTE: The emergency stop must be deactivated when
starting the machine.
23 Speed limiter Limitation of the machine's max. speed (max.speed is
obtained with full deflection of the F/R lever). Set the knob to
the required position and read the speed on the display (30). 23 Speed limiter Limitation of the machine's max. speed (max.speed is
obtained with full deflection of the F/R lever). Set the knob to
the required position and read the speed on the display (30).
24 Rpm switch, diesel engine Three-position switch for idling (LO), intermediate speed (MID)
and working speed (HI).
NOTE: The lever must be in neutral (LO) when starting the
machine. The engine also runs at low speed when stationary,
more than approx. 10 seconds if the F&R lever is in neutral.
If the F&R lever is moved out of neutral the speed will
increase to the set speed again. If the machine has a fuel
optimization system, MID is replaced by ECO (and the switch
is green).
24 Rpm switch, diesel engine Three-position switch for idling (LO), intermediate speed (MID)
and working speed (HI).
NOTE: The lever must be in neutral (LO) when starting the
machine. The engine also runs at low speed when stationary,
more than approx. 10 seconds if the F&R lever is in neutral.
If the F&R lever is moved out of neutral the speed will
increase to the set speed again. If the machine has a fuel
optimization system, MID is replaced by ECO (and the switch
is green).
25 Parking brake When pressed, the parking brake is activated.
To release the brakes, slide the red part back (towards you)
and change the position of the lever.
NOTE: When starting the machine, the parking brake must
be activated.
25 Parking brake When pressed, the parking brake is activated.
To release the brakes, slide the red part back (towards you)
and change the position of the lever.
NOTE: When starting the machine, the parking brake must
be activated.
To activate the brakes, press the top of the switch to change
the position of the lever.
To release the brakes, press down the red part at the same
time as the switch and change the position of the lever.
NOTE: When starting the machine, the parking brake must
be activated.
To activate the brakes, press the top of the switch to change
the position of the lever.
To release the brakes, press down the red part at the same
time as the switch and change the position of the lever.
NOTE: When starting the machine, the parking brake must
be activated.
34