manualshive.com logo in svg

Fayat Bomag BW 900-50, Инструкция по эксплуатации, Инструкция по обслуживанию

Поделиться
Скачать
Fayat Bomag BW 900-50 Скачать руководство пользователя страница 76

Turn the flywheel clockwise further 

Ä

 Fig.  96, until the marks

(2, 3) are in line.

Check and , if necessary, adjust the valve clearance of the

2nd cylinder.

After checking and adjusting reassemble the cylinder head

covers with new gaskets.

Tighten the cylinder head screws.

After a short test run check the engine for leaks.

6.8.5  Check, adjust the idle speed

NOTICE!

We recommend to have this work carried out by

trained personnel or our after sales service.

Check and adjust only at operating temperature of

the engine.

Setting: 1400 ± 150 min

-1

Run the engine to warm it up to operating temperature.

Adjust the engine idling speed with the setscrew (1)

Ä

 Fig.  97.

Fig.  96

Fig.  97

Maintenance – Every 250 operating hours

 

BW 900-50

 

77

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание Bomag BW 900-50



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды