Fayat Bomag BW 900-50 Скачать руководство пользователя страница 63

Страница: 63 / 90

WARNING!
Fire hazard!

When working on the fuel system do not use open

fire, do not smoke, do not spill any fuel.

Do not refuel in closed rooms.

Shut down the engine.

WARNING!
Health hazard!

Do not inhale any fuel fumes.

NOTICE!

Contaminated fuel can cause malfunction or even

damage of the engine. If necessary, fill in fuel

through a funnel with screen.

Monitor the entire refuelling process.

For quality and quantity of fuel refer to the "table of

fuels and lubricants".

ENVIRONMENT!

Catch running out fuel, do not let it seep into the

ground.

Shut down the engine.

Open the fuel filler cap

Fig. 72.

Clean the area around the filler opening.

Open the cover.

Fill in fuel.

Screw the cover back on again.

Close the tank lock.

Refuelling

Fig. 72

Maintenance – Every 10 operating hours

BW 900-50

Discount-Equipment.com

order

your

parts

Содержание Bomag BW 900-50



























































































Результаты поиска

Содержание Bomag BW 900-50

Отзывы:

Бренды по названию

Популярные бренды

Fayat Bomag BW 900-50, Инструкция по эксплуатации, Инструкция по обслуживанию

Результаты поиска

Содержание Bomag BW 900-50

Отзывы:

Бренды по названию

Популярные бренды