manualshive.com logo in svg

Fayat BOMAG BVP 12/50 A, Инструкция по эксплуатации

Поделиться
Скачать
Fayat BOMAG BVP 12/50 A Скачать руководство пользователя страница 99

9.3  What to do if the engine has flooded

DANGER!
Danger to life caused by explosive gas-air

mixes!

–

Do not allow gasoline to come into contact with

hot components.

–

Smoking and open fire is prohibited.

–

Keep away from heat sources, sparks and

other sources of ignition.

–

Do not spill any gasoline.

Protective equipment:

n

Working clothes

n

Safety shoes

n

Protective gloves

n

Safety goggles

Special tool:

n

13/16 inch spark plug spanner

1.

Allow the engine to cool down.

2.

Close the fuel valve.

3.

Pull off the spark plug socket.

4.

Unscrew the spark plug using a 13/16 inch spark plug

spanner.

5.

Have a cloth ready to soak up the fuel.

B-HON-0036

Fig.  102

B-834-0029

Fig.  103

Troubleshooting – What to do if the engine has flooded

 

BVP 12/50 A

 

105

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание BOMAG BVP 12/50 A










































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды