manualshive.com logo in svg

Fayat BOMAG BVP 12/50 A, Инструкция по эксплуатации

Поделиться
Скачать
Fayat BOMAG BVP 12/50 A Скачать руководство пользователя страница 93

3.

Start the engine and run the machine for approx. 10 minutes

in the open.

4.

Park the machine in secured condition.

1.

Close the fuel valve.

2.

Disassemble the drain plug (3) and the seal (4) from the car-

burettor and collect leaking fuel.

3.

Disassemble the filter bowl (2) and the O-ring (1).

4.

Open the fuel valve and collect running out fuel.

5.

Close the fuel valve.

6.

Install the drain plug with the seal on the carburettor.

7.

Assemble the filter bowl with the O-ring.

8.

Dispose of fuel in line with environmental regulations.

Special tool:

n

13/16 inch spark plug spanner

1.

Unscrew the spark plug using a 13/16 inch spark plug

spanner.

2.

Fill in several drops of fresh engine oil through the ignition

plug opening.

Emptying the fuel tank

B-HON-0036

Fig.  98

B-834-0045

1

2

3

4

Fig.  99

Protecting the cylinder

B-834-0029

Fig.  100

Maintenance – As required

 

BVP 12/50 A

 

98

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание BOMAG BVP 12/50 A










































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды