Fayat BOMAG BT 60 Скачать руководство пользователя страница 19

Страница: 19 / 77

Refuel only with the engine shut down.

Do not refuel in closed rooms.

No open fire, do not smoke.

Do not spill any fuel. Catch running out fuel, do not let it seep into

the ground.

Keep dirt and water away from the fuel.

A leaking fuel tank can cause an explosion. Ensure tight fit of the

fuel tank cover, if necessary replace immediately.

Fuel stabilizer

Fuel stabilizer is inflammable. No open fire, do not smoke. Do not

spill any fuel stabilizer.

Do not inhale any fuel stabilizer fumes.

Do not swallow fuel stabilizer.

Avoid contact with skin and eyes.

Comply with the maintenance work described in the operating and

maintenance instructions, including the information concerning the

replacement of parts.

Maintenance work must only be performed by qualified and author-

ized persons.

Keep unauthorized persons away from the machine.

Do not touch hot engine parts.

Generally perform maintenance work only with the engine shut

down and the spark plug socket disconnected.

Park the machine on level and solid ground and secure it against

tipping over.

Working on the fuel system

Do not inhale any fuel fumes.

Do not swallow fuel.

Avoid contact with skin and eyes.

Avoid open fire, do not smoke, do not spill any fuel.

Catch running out fuel, do not let it seep into the ground and dis-

pose off environmentally.

Working on the engine

When working on the air filter no dirt should fall into the air duct.

Do not work on the hot exhaust - danger of burning!

When working on the engine exhaust duct no combustion residues

should fall into the cylinder.

Do not touch the piston with the cleaning tools.

Working on the tamper foot

Wipe off spilled oil, catch running out oil and dispose of environ-

mentally.

Maintenance work

Safety regulations

BT 60 / BT 65

Go to

Discount-Equipment.com

order your parts

Содержание BOMAG BT 60














































































Результаты поиска

Содержание BOMAG BT 60

Отзывы:

Похожие инструкции для BOMAG BT 60

Бренды по названию

Популярные бренды

Fayat BOMAG BT 60, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание BOMAG BT 60

Отзывы:

Похожие инструкции для BOMAG BT 60

Бренды по названию

Популярные бренды