manualshive.com logo in svg

Fayat BOMAG BPR 60/65 D, Инструкция по эксплуатации, Инструкция по обслуживанию

Поделиться
Скачать
Fayat BOMAG BPR 60/65 D Скачать руководство пользователя страница 73

8.10  Annually

8.10.1 

Changing the engine oil and cleaning the oil filter

Change the engine oil at the latest after 250 oper-

ating hours.

NOTICE!
Danger of engine damage!

–

Change the oil only with the engine at oper-

ating temperature.

–

Use only oil of the permitted specification

Ä

 Chapter 8.3.1 „Engine oil“ on page 62

.

–

Filling quantity: 

Ä

 Chapter 8.4 „List of fuels and

lubricants“ on page 64

Protective equipment:

n

Working clothes

n

Protective gloves

n

Safety goggles

1.

Park the machine in secured condition

 

Ä

 Chapter 6.4 „Park

the machine in secured condition.“ on page 53

.

2.

Clean the area around the dipstick and pull the dipstick out.

3.

Clean the area around the drain hose.

4.

Loosen the hose clamp (1) and route the drain hose to the

outside.

5.

WARNING!
Danger of burning on hot components!

–

Wear your personal protective equipment

(protective gloves, protective clothing).

–

Avoid touching hot components.

Unscrew the oil drain plug (2) and catch any oil running out.

6.

Clean the drain plug and screw it back in.

7.

Assemble the drain hose with the hose clamp.

Draining off engine oil

Fig.  46

Maintenance – Annually

 

BPR 60/65 D

 

74

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание BOMAG BPR 60/65 D







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды