Fayat BOMAG BPR 35/42 D Скачать руководство пользователя страница 58

Страница: 58 / 86

Remove the filter cover (3)

Fig. 45.

Unscrew the knurled nut (2) and pull out the air filter (1).

NOTICE!

The clean air side must be kept clean of dirt and for-

eign particles.

Do not blow the inside of the filter housing out with

compressed air.

Wipe the inside of the filter housing only with a clean cloth.

Clean the cover thoroughly.

WARNING!
Danger of injury!

Always wear protective clothes (goggles, gloves) when

working with compressed air.

Blow the air filter

Fig. 46 out from inside to outside with

dry compressed air (max. 5 bar (73 psi)).

Check the air filter for damage, replace if necessary.

Insert the air filter (1)

Fig. 45 into the housing and fasten it

with the knurled nut (2).

Install the filter cover (3), ensure correct fit of cover and seal.

Fig. 45

Fig. 46

Maintenance

BPR 35/42 D - BPR 35/60 D

Go to

Discount-Equipment.com

order your parts

Содержание BOMAG BPR 35/42 D























































































Результаты поиска

Содержание BOMAG BPR 35/42 D

Отзывы:

Похожие инструкции для BOMAG BPR 35/42 D

Бренды по названию

Популярные бренды

Fayat BOMAG BPR 35/42 D, Руководство по эксплуатации

Результаты поиска

Содержание BOMAG BPR 35/42 D

Отзывы:

Похожие инструкции для BOMAG BPR 35/42 D

Бренды по названию

Популярные бренды