Fayat BOMAG BPR 35/42 D Скачать руководство пользователя страница 38

Страница: 38 / 86

WARNING!
Danger of accident!

As a measure to avoid injury the machine must only be

guided from the side by the steering handle

Pull the travel lever

Fig. 26 back, until the vibratory plate

has reached the desired speed in reverse.

The machines vibrates backwards with a speed which corresponds

to the travel lever position.

Move the travel lever

Fig. 27 to middle position, the

machine will vibrate on the spot.

Keep shifting the throttle lever

Fig. 28 between "MIN" and

"MAX" positions.

At the same time pull the vibratory plate by the steering rod

to the right and left, until it comes free.

Drive backwards

Fig. 26

Vibration on the spot

Fig. 27

If the vibratory plate got stuck

Fig. 28

Operation

BPR 35/42 D - BPR 35/60 D

Go to

Discount-Equipment.com

order your parts

Содержание BOMAG BPR 35/42 D























































































Результаты поиска

Содержание BOMAG BPR 35/42 D

Отзывы:

Похожие инструкции для BOMAG BPR 35/42 D

Бренды по названию

Популярные бренды

Fayat BOMAG BPR 35/42 D, Руководство по эксплуатации

Результаты поиска

Содержание BOMAG BPR 35/42 D

Отзывы:

Похожие инструкции для BOMAG BPR 35/42 D

Бренды по названию

Популярные бренды