Fayat BOMAG BPR 25/40 D, Руководство по эксплуатации

Страница: 58 / 79

6.10.2 Clean the engine oil filter
WARNING!
Danger of scalding!
When draining off hot oil.
By hot oil when unscrewing the engine oil filter.
NOTICE!
Remove and clean the engine oil filter only after
draining off the engine oil.
Park the machine on level ground so that the engine is
in horizontal position.
ENVIRONMENT!
Catch running out old oil, do not let it seep into the
ground and dispose off environmentally.
Loosen the fastening screw for approx. 5 turns and pull the
engine oil filter out of the housing Ä Fig. 46.
WARNING!
Danger of injury!
Always wear goggles when working with compressed
air.
Blow the engine oil filter out with compressed air from inside
to outside.
Check the seal (1) for damage, change if necessary.
Cover seal rings (1) and (2) slightly with oil before assem-
bling.
Push the engine oil filter into the housing.
Before tightening the screw make sure that the ten-
sioning springs touch the oil filter with both ends.
Tighten the fastening screw.
After filling in engine oil perform a short test run and check
for leaks, if necessary tighten the fastening screw.
Fig. 46
Maintenance
BPR 25/40 D - BPR 25/50 D 62
Go
to
Discount-Equipment.com
to
order
your
parts