manualshive.com logo in svg

Fayat Bomag BP 25/50, Инструкция по эксплуатации, Инструкция по обслуживанию

Ознакомьтесь с эксклюзивным продуктом Fayat Bomag BP 25/50. Здесь вы можете загружать бесплатно руководства по эксплуатации и обслуживанию. Получите все необходимые инструкции по использованию и техническому обслуживанию этого устройства на manualshive.com. Будьте уверены в правильной и безопасной эксплуатации продукта.

Поделиться
Скачать
background image

8.8  Half-annually

8.8.1  Changing the engine oil

Perform this maintenance work at the latest after 100

operating hours

NOTICE!
Danger of engine damage!

–

Change the oil only with the engine at operating

temperature.

–

Use only oil of the permitted specifica-

tion

Ä

 Chapter 8.2.1 ‘Engine oil’ on page 65

.

–

Filling quantity: 

Ä

 Chapter 8.3 ‘Table of fuels and

lubricants’ on page 67

Protective equipment:

n

Working clothes

n

Protective gloves

1.

Park the machine in secured condition

Ä

 Chapter 6.5 ‘Park

the machine in secured condition.’ on page 56

.

2.

WARNING!
Danger of burning on hot components!

–

Wear your personal protective outfit (protec-

tive gloves, protective clothing).

Clean the area around oil dipstick (1) and drain plug (3).

3.

Unscrew the oil dipstick.

4.

Unscrew the oil drain plug and catch any oil running out.

5.

Clean the oil drain plug and screw it back in with a new seal

ring (2).

6.

Fill in oil up to the bottom edge of the filler bore.

7.

Push the oil dipstick (1) back in.

8.

Check for leaks after a short test drive.

9.

Check the oil level on the dipstick, correct if necessary.

10.

Dispose of old oil environmentally.

Fig.  52

Fig.  53

Maintenance – Half-annually

 

BP 25/50

 

75

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание Bomag BP 25/50





































































































Отзывы:

Нет отзывов

Похожие инструкции для Bomag BP 25/50

Бренды по названию

Популярные бренды

Загрузить еще бренды