Fayat Bomag BP 25/50 Скачать руководство пользователя

Страница: 16 / 100

CAUTION!
Danger of injury if failing to comply!

Sections marked like this point to a dangerous situa-

tion that could lead to minor injuries, if this warning is

disregarded.

NOTICE!
Danger of material damage if failing to comply!

Sections marked like this highlight possible dangers for

machines or components.

Sections marked like this provide technical information

or notes on using the machine or its components.

ENVIRONMENT!
Environmental damage if failing to comply!

Paragraphs marked like this point out practices for

safe and environmental disposal of fuels and lubricants

as well as replacement parts.

3.1.3 Personal protective outfit

Depending on the work to be carried out, personal protective outfit is required (to be provided by the

operating company):

Working clothes

Tight fitting working clothes with low tear resistance, tight

sleeves and without any projecting parts protects against

being caught by moving components.

Safety shoes

To protect against heavy falling parts and slipping on

slippery ground.

Protective gloves

To protect the hands against excoriation, punctures or

deep injuries, against irritating and caustic substances

as well as against burns.

Concerning your safety – General prerequisites

BP 25/50

Discount-Equipment.com

order

your

parts

Содержание Bomag BP 25/50





































































































Результаты поиска

Содержание Bomag BP 25/50

Отзывы:

Похожие инструкции для Bomag BP 25/50

Бренды по названию

Популярные бренды

Fayat Bomag BP 25/50, Инструкция по эксплуатации, Инструкция по обслуживанию

Результаты поиска

Содержание Bomag BP 25/50

Отзывы:

Похожие инструкции для Bomag BP 25/50

Бренды по названию

Популярные бренды