Fayat Group Dynapac CC900G, Инструкция по эксплуатации

Страница: 16 / 104

Safety - when operating
4812163901_A.pdf 2019-09-23
Driving near edges
Never operate with roller outside the edge, if the
substrate does not have full bearing strength or is
close to a slope. Never operate with roller outside the edge, if the
substrate does not have full bearing strength or is
close to a slope.
Keep in mind that the machine's center of gravity
moves outwards when steering. For example, the
center of gravity moves to the right when you steer
to the left. Keep in mind that the machine's center of gravity
moves outwards when steering. For example, the
center of gravity moves to the right when you steer
to the left.
Seated position
Figure. Seat position
1. ROPS
2. Seat belt
2
1
Remain seated at all times when operating the roller.
Always use the seat belt where fitted. Where the
seat belt is not used, there is a great risk that the
operator will be thrown off and land under the
machine if the machine topples over. Always use the seat belt where fitted. Where the
seat belt is not used, there is a great risk that the
operator will be thrown off and land under the
machine if the machine topples over.
The seat belt is standard equipment on rollers fitted
with Roll Over Protective Structure (ROPS) (1).
ROPS should always be in the raised position
when machines with foldable ROPS are operated ROPS should always be in the raised position
when machines with foldable ROPS are operated
8