Fayat Group Dynapac CC900G, Инструкция по эксплуатации

Страница: 100 / 104

Maintenance - 2000h
4812163901_A.pdf 2019-09-23
4
Fig. Engine compartment, right side
4. Filler cap
Undo the oil filler cap (4) and remove the plug (2) from
the end of the drain hose (1); allow all the engine oil to
run out.
Deliver the drained oil to special waste handling. Deliver the drained oil to special waste handling.
Refer to the engine manual for detailed
instructions when changing oil and filters. Refer to the engine manual for detailed
instructions when changing oil and filters.
Remove the oil filter (3) and insert a new one.
Collect any spillage.
Fit the drain plug (2) to the end of the hose.
Fill with fresh engine oil (see under Lubricants heading
for the correct oil grade), refit the filler cap (4) and
check the level on the dipstick.
Start the engine and check the tightness around the oil
filter.
Engine's fuel filter - Check
Fig. Engine compartment left side
1. Fuel filter
1
Switch off the engine and push in the
reserve/parking brake knob. Switch off the engine and push in the
reserve/parking brake knob.
Use caution. Wear gloves. Use caution. Wear gloves.
If the fuel filter is full of water or deposits, replace the
filter with a new one.
Refer to the engine manual for detailed
instructions. Refer to the engine manual for detailed
instructions.
Dispose of the old filter carefully. Dispose of the old filter carefully.
92