Maintenance
– 500 h
02-17-2021
4812325897EN
81
Maintenance, 500 hours
Every 500 hours of operation (every three months)
Diesel engine - Oil and filter change
Take great care when draining warm fluid and oil. Wear
protective gloves and goggles.
The oil drain plug (1) can be accessed most easily under
the engine. Shut down the machine and drain the oil when
the engine is warm. Place a container with a minimum
capacity of 19 liters under the drain plug.
Replace the engine oil filter at the same time. Refer
to the engine manual.
Value of plug tightening torque: 24 N.m
Hand in the drained oil and filter to an environment-
friendly waste disposal station.
Diesel engine - Fuel filter and pre-filter
Replace
Remove the threaded fuel filter using the filter wrench.
Lubricate the O-ring with clean engine oil.
Do not pre-fill the engine fuel filter.
Install the filter in the filter head. Tighten the filter until the
gasket touches the surface of the filter head. Tighten the
fuel filter plus ¾ turn after contact.
Bleed the fuel system after installing the fuel filter.
Refer to the bleed procedure in the engine manual.
Fig. Engine left side:
1. Drain plug;
1
Fig. Fuel filter
