Fayat Group BOMAG BW 226 BVC-5 Скачать руководство пользователя страница 28

Static charges may be generated in the fuel as it passes through

the filling system. The discharge of these charges in the presence

of combustible vapours can cause fire or an explosion.
Ultra-low sulphur diesel fuel poses a higher risk of combustion

caused by the static charging than diesel fuel with a higher sulphur

content.
You should therefore always make sure that the filling system is

properly grounded and that there is equipotential bonding to the

machine. If necessary use a connecting cable between filling

system and vehicle ground.
Monitor the entire refuelling process.
Do not spill any fuel. Collect leaking fuel, do not let it seep into the

ground.
Wipe off spilled fuel. Keep dirt and water away from the fuel.
A leaking fuel tank can cause an explosion. Ensure tight fit of the

fuel tank cover, if necessary replace immediately.

1.2.9  Emergency procedures

1.2.9.1  Actuating the emergency stop switch

In events of emergency and in case of danger actuate the emer-

gency stop switch immediately.
The machine is braked immediately, the engine is shut down.
Restart the machine only after the danger that caused the actua-

tion of the emergency stop switch has been eliminated.
In case of frequent use the wear on the multi-discs brakes will be

very high, you should therefore never use the emergency stop

switch as a service brake.

1.2.9.2  Disconnecting the battery

In events of emergency, e.g. in case of a cable fire, disconnect the

battery from the vehicle network.
Pull out the main battery switch or lift off the battery pole to do so.

1.2.9.3  Towing the machine

Tow the machine only in a case of emergency or to avoid an acci-

dent.
Before releasing the parking brake apply suitable measures to

secure the machine against unintended rolling.
Use a tractor vehicle with sufficient traction and braking power for

the unbraked towed load.
If no tow bar is used, towing is only permitted uphill.

General – Concerning your safety

 

BW 226 BVC-5 / BW 226 DI-5

 

28

Содержание BOMAG BW 226 BVC-5




















































Отзывы: