Fayat Group BOMAG BW 226 BVC-5, Руководство по обслуживанию

Страница: 26 / 51

1.2.7.2 Driving the machine
Always wear the seat belt when driving.
Only drive on load-bearing surfaces.
Do not drive on ice and snow.
If the machine has touched high-voltage power lines:
n Do not leave the driver’s stand
n
Warn others from coming close to or touching the machine
n If possible, drive the machine out of the danger zone
n
Have the power switched off.
Operate the machine only from the driver’s stand.
Keep the cabin doors closed.
Do not adjust the driver’s seat while driving.
Do not climb onto or off the machine while the machine is driving.
Do not use the machine to transport persons.
In case of unusual noises and development of smoke perform
trouble shooting to determine the cause and have the fault cor-
rected.
Match the speed to the working conditions.
Do not make extreme steering movements when driving at high
speed: danger of tipping over!
Always give way to loaded transport vehicles.
Switch the lights on if visibility is poor.
Always keep a safe distance to excavation pit borders, embank-
ments and edges.
Refrain from any work that could adversely affect the stability of the
machine.
Always keep a sufficient distance when passing through subways,
under bridges, tunnels, electric power lines, etc.
1.2.7.3 Driving up and down slopes
Do not drive on gradients or slopes exceeding the maximum gra-
deability of the machine
Ä
Chapter 2 „Technical
data“ on page 61
.
Drive extremely carefully on gradients and always directly up or
down the slope.
Soil conditions and weather influences impair the gradeability of
the machine.
Wet and loose soil considerably reduces traction of the machine on
inclinations and slopes. Increased danger of accident!
General – Concerning your safety
BW 226 BVC-5 / BW 226 DI-5 26