Operation
BOMAG
24
BT 60 / BT 65
Fig. 11
l
Pull the rope by the starter handle (Fig. 11) un-
til resistance can be felt.
l
Let the starter handle run back to initial posi-
tion.
Fig. 12
l
Pull the starter handle quickly and with power
(Fig. 12) .
!
Caution
Do not let the starter handle hit back.
l
Guide the starter handle back to initial position
by hand.
l
If the engine does not start during the first at-
tempt, repeat the starting process.
Fig. 13
l
Open the choke (Fig. 13) 3 to 6 seconds after
the engine has started running.
Fig. 14
l
Set the throttle lever (Fig. 14) to position "MIN"
and let the engine run warm for 1 to 2 minutes.
i
Note
Once the engine has warmed up you can start to
work with the tamper.
Starting under cold weather conditions
l
If the engine stops again after approx. 3 to 5
seconds, close the choke again and repeat the
starting process.
541007
3-6 Sec.
Go
to
Discount-Equipment.com
to
order
your
parts
