Operation
BOMAG
22
BT 60/4 BT 65/4
Fig. 13
●
Pull the rope by the starter handle (Fig. 13) un-
til resistance can be felt.
●
Let the starter handle run back to initial posi-
tion.
Fig. 14
●
Pull the starter handle quickly and with power
(Fig. 14).
!
Caution
Do not let the starter handle hit back.
●
Guide the starter handle back to initial position
by hand.
●
If the engine does not start during the first at-
tempt, repeat the starting process.
Fig. 15
●
Open the choke (Fig. 15) 3 to 6 seconds after
the engine has started running.
Fig. 16
●
Set the throttle lever (Fig. 16) to position "MIN"
and let the engine run warm for 1 to 2 minutes.
i
Note
Once the engine has warmed up you can start to
work with the tamper.
Starting under cold weather conditions
●
If the engine stops again after approx. 3 to 5
seconds, close the choke again and repeat the
starting process.
Engine oil level too low
The engine does not start if the oil level is too low.
●
Check the engine oil level, fill up if necessary.
●
Repeat the starting procedure.
Go to
Discount-Equipment.com
to
order your parts
